Average loading capacity of 1,000 kg/day with maximum loading capacity of 1,200 kg.
Nominal burning rate shall be 100 -140 kg/hr with 8 hour daily operating cycle of ash removal, pre-heat and burn with continuous loading.
Primary power source shall be electricity but capable of using diesel fuel as a supplemental fuel.
The waste incinerators shall be designed for 3 Phase, 380-400 V, 50 Hz electricity supply.
Should have dual combustion chambers with gas temperature achieve 1000 C for retention time at least 2 second,
Have a thermal efficiency of not less than 85%.
All metal surfaces (except combustion chamber internal fittings) shall be either galvanized, enameled, painted or otherwise treated against atmospheric and process induced corrosion.
The incinerator combustion chambers should be designed for easy maintenance of all internal parts including the refractory and insulation. Materials used in the individual parts of the incinerator shall be heat resistance and also be protected against oxidation, corrosion, etc.
Primary and secondary chambers preferably have rounded inside corners to avoid the formation of dead zone or cold pockets.
Primary power source shall be electricity but capable of using diesel fuel as a supplemental fuel.
The waste incinerators shall be designed for 3 Phase, 380-400 V, 50 Hz electricity supply.
Should have dual combustion chambers with gas temperature achieve 1000 C for retention time at least 2 second,
Have a thermal efficiency of not less than 85%.
All metal surfaces (except combustion chamber internal fittings) shall be either galvanized, enameled, painted or otherwise treated against atmospheric and process induced corrosion.
The incinerator combustion chambers should be designed for easy maintenance of all internal parts including the refractory and insulation. Materials used in the individual parts of the incinerator shall be heat resistance and also be protected against oxidation, corrosion, etc.
Primary and secondary chambers preferably have rounded inside corners to avoid the formation of dead zone or cold pockets.
WWW.HICLOVER.COM｜Waste Incinerators ｜Auto Roll Air Filters
Nanjing Clover Medical Technology Co.,Ltd.
Tel: +86-25-8461 0201
Website: www.hiclover.com
Email: sales@hiclover.com
Email: hicloversales@gmail.com
